Success story in collaboration with Inser Robótica

Video at the end of the publication

At ZERBIMEK we are pleased to share a success story in collaboration with Inser Robótica in which all stages of our machining service are reflected. Inser Robótica is a leader in the design and manufacture of automation solutions for the final stage of the production line, moreover we are currently collaborating in a project described below, in which our machining service has been crucial.

We are proud to have performed the machining of all parts of the assembly that are used by a welding robot, guaranteeing maximum precision and functionality. Undoubtedly this has been possible thanks to our people, state-of-the-art equipment and machinery. We have been able to manufacture components with minimum tolerances and impeccable finishes.

Conjunto mecanizado y montado para Inser Robótica

Conjunto mecanizado y montado para Inser Robótica

Conjunto mecanizado y montado para Inser Robótica








But our contribution was not limited to machining alone. We have taken on the complete management of the project, from the acquisition of the necessary material, to the boiler work, to the realization of the specific treatments and laser engravings required by Inser Robótica. Our flexibility has been an indispensable aspect allowing us to provide a turnkey solution, saving time and resources to our customer.

In addition, we took care of the assembly of the assemblies, ensuring that each component is perfectly assembled. Our highly trained team ensured that the most rigorous standards were met at every stage of the process, guaranteeing the quality and performance of the manufactured assemblies.

This successful collaboration with Inser Robótica is a testament to our machining expertise and a clear example of the service we offer and the management we put in place to deliver it.

In the video below, you can see the assemblies we have manufactured for our customer in operation.

If you are looking for a reliable company that takes care of all the stages, from machining to assembly of assemblies, we are your ideal partner. Contact us and we will be happy to meet you and see how we can collaborate on your next project.

Feria Subcontratacion zerbimek

subcontracting fair BEC 2023

It is a pleasure for us to be able to tell you about the great experience we had on 6, 7 and 8 June. During this days, Zerbimek was present as exhibitor at the subcontracting fair held at the BEC – Bilbao Exhibition Centre. This fair is a benchmark fair in the machining sector, with both national and international exhibitors and visitors. 

Our participation in the fair came hand in hand with the Gipuzkoa Chamber of Commerce, exhibiting our machining services with them.

We are very proud of the results obtained at the fair, as during it we made a variety of contacts. We also were visited by many customers and suppliers at our stand. 

Finally, we would like to thank all the people who came to our exhibition and were interested in the services we offer. This would not be possible without you!

Feria Subcontratacion zerbimek Feria Subcontratacion zerbimek


Global industrie fair

We are pleased to announce that ZERBIMEK will be exhibiting at Global Industrie 2023 in Lyon, France from 7th to 10th March. This event is one of the most important industrial fairs in Europe and represents a unique opportunity to present our machining services to a global audience and to expand our presence in the international market.

Our participation at Global Industry is made possible thanks to the collaboration of the Chamber of Commerce of Gipuzkoa, which has given us the opportunity to showcase our machining services on stand 6A110.

Find out more about our participation in Global Industrie and the services we offer.

We are attending Global Industrie to exhibit to a global audience and to expand our presence, particularly in the French market where we are already present. We see this as an opportunity to showcase our track record, our working methods, our services and the technology we use.

In addition, you will be able to meet part of our team and clear up any doubts you may have, as our Export Manager – Marta Azpiroz – will be present in Lyon and will be happy to meet you and clear up any doubts you may have.

Our machining service includes

  • Technical advice: The advice is present in all the phases, whenever it is necessary or any phase can be optimised.
  • CNC milling: We have the latest generation of machines to carry out high precision and high-quality CNC milling.
  • CNC turning: We have the latest machinery to carry out high precision, high quality CNC turning.
  • Treatments: We carry out surface and heat treatments.
  • Grinding: We carry out high quality grinding to ensure the precision and perfect finish of the parts.
  • Assembly: We can assemble assemblies and subassemblies if required.

We look forward to seeing you in Lyon!

centro de mecanizado vertical

New vertical machining center

We are delighted to announce the latest news in our machining workshop, we have acquired a new L850 vertical machining center from Lagun Machinery, our trusted manufacturer for vertical machining centers, as you will appreciate if you take a look at our machining centers and lathes park.

As always, our goal is to provide the best machining service to our customers, and to achieve this, we have decided to expand our productive means with a new CNC machining center. This vertical machining center has the following dimensions in its X, Y and Z axes.

  • Longitudinal course (X) 850 mm.
  • Transversal course (Y) with rules 485 mm.
  • Transversal course (Y) 500 mm.
  • Vertical course (Z) 630 mm.

At ZERBIMEK, we have a wide variety of machining centers, both vertical machining centers and CNC lathes. This allows us to adapt to the needs of each project. In addition, our CNC machining centers are equipped with the latest technologies, which allow for quick tool changes and machining larger and more precise parts.

With this new machining center, we will be able to handle a greater volume of work always respecting the agreed delivery dates, and offering the best machining service always incorporating technical advice in all phases of the service.Fresadora LAGUN 850

Do not hesitate to contact us to learn more about our machining services by sending an email to! Our professionals will be happy to advise you and answer any questions or queries and help you with the project you have in mind.

Zerbimek ADEGI

“New culturers” day of ADEGI

Last week our team was invited to the “New culturers” day of ADEGI – Association of Companies of Gipuzkoa in FabrikaNCE.

In this fourth edition all the people who attended had the opportunity to learn about the new culture of the companies that were invited, more than 20 companies from different sectors.

For this macro event in which nearly 700 people gathered, the meeting place was the FabrikaNCE, ADEGI’s high performance center, where companies and educational organizations work and develop the new culture through the improvement of relationships, effectiveness, flexibility and adaptability.

Each company was able to present its particular case and show how the new culture helps the organization in its proper functioning, in terms of production and management, both administrative and talent.

In addition, the new culture also adds value when it comes to attracting and retaining talent, since being part of the project and taking an active part in decision making increases the motivation of workers, obtaining the best performance from people.

We would like to thank the attendees for their attention and time, and especially ADEGI for the invitation and the opportunity it has given us to make our company known to future generations who will soon be joining the working world.

Finally, we would also like to thank all the participating companies (Alkorta, GKN, Hre Automation, Grupo Wec, Zerbimek, Bellota, Cadinox, Egile, Plastigaur, Spanset, Marie Brizard, Irisbond, Salto Systems, Telesonic, VIVEBiotech, Zuchetti Software, Ameztoi, Comercial Hostelera, Frigolan, Okin) for the work done.

Zerbimek ADEGI


6 days to finalize details and ready for Metal Madrid 2022

On October 19 will begin the new edition of Metal Madrid, Composites and Robomatics Madrid, organized by Advanced Manufacturing Madrid. This edition of the event has 38,400m2 that will host more than 600 exhibiting companies, ZERBIMEK one of them and more than 15,000 professionals.

This year the event has several new features and live demonstrations of high-tech machines. CNC milling machines and lathes, robots, forklifts, lifting platforms, 3D printers, 3D scanners, laser welding, augmented reality and many other different services and value propositions.

In addition to this there are several reasons why the event is worth visiting:

  • You will be able to listen to several industry experts for free to more than 60 presentations and success stories.
  • Discover or deepen on the value that Industry 4.0 can bring to your business.
  • Learn about the latest developments in industry technology, presented by industry leaders, start-ups or technology centers among others.
  • You will be able to increase your network of contacts to respond to future needs you may have to cover.
  • Finally, with more than 600 exhibitors, you will find solutions for different areas such as R&D, design, production, quality, materials…

Are you going to miss it?

Remember to visit us in Hall 4 stand C14, we will be together with AFM.

We are waiting for you!

Zerbimek-eko langileak

3 years of growth in our new facilities

3 years since the ZERBIMEK team took a big step to continue optimizing each phase of the machining service.

The new facilities of our machining company in Arrasate, have allowed us to increase the workload and respond to the needs of our customers.

The increased workload has meant continuing to invest in the development of human knowledge, with several recruitments and training in different departments. It has also allowed us to continue investing in state-of-the-art machining technology, such as the 5-axis L5AX-320 machine from LAGUN and the TA-Z640 lathe from CMZ.

fresadora 5 ejestorno CMZ






These factors have been crucial in optimizing our machining service, but the most relevant factor has been the strategic one, since through the organization of production and various tools we have managed to increase the efficiency of the machining service provided to the end customer.

Finally, it should be noted that this growth would not be possible without the vote of confidence of our customers, thank you all.

Zerbimek en Metalmadrid

Get to know our machining service at MetalMadrid

We will be present at MetalMadrid, the leading event in industrial innovation, being a very important meeting point for many industrial companies that offer different solutions, such as our machining shop.

Once again, the event will take place at the IFEMA fairgrounds, on the 19th and 20th of October, where you can find us in Hall 4, stand C14. We will be at your disposal to answer your questions, offer you information about our CNC machining service or a first contact.

Meet us in person!

If you have heard about us, this is the perfect place and time to find out more about our service and how we can add value to you. On the other hand, if you haven’t been lucky enough to hear about us before, take the opportunity to get to know us and have our contact for jobs we can collaborate on in the future.

To do so, we provide you with the link for free registration 👇​👇

Register here for free

We look forward to seeing you and getting to know you!

Zerbimek closed for vacations

We are about to finish the month of July, and this means that the vacations are about to arrive.

After an intense period of work that has allowed us to increase our efficiency, responding to a greater volume of work than last year at this time.

We would like to inform you that our machining company will be closed from August 8th to August 19th, both included.

Once again, we would like to thank you all for making this possible.

Enjoy your vacations! 🎉🎉


ZERBIMEK invited to the conference organized by UPV and the Provincial Council of Gipuzkoa

On July 8, we were invited to participate in the conference “Ambidextrous Company, new paradigm for management” organized by the UIK (Udako Ikastaroak), UPV – University of the Basque Country and the Provincial Council of Gipuzkoa.

The conference was led by Iker Estensoro – General Director of Economic Promotion at the Provincial Council of Gipuzkoa. Together with Alain Vivas from ZERBIMEK participated, Marcos Urarte – PHAROS, Sonia Ortubai – Abantail, Mikel Orobengoa – ISEA S.COOP, Maria Carpenter – Institut Mines-Télécom Business School – Mark Greeven – Institute for Management Development.

Considering the relevance of the conference and the quality of the speakers, for our machining company, this invitation was an opportunity to learn from other companies and the management models they use.

On the other hand, we would also like to highlight the opportunity that the organizers have given us by betting on our machining company, since access to this type of events is not usual for SMEs like ours, which represent a large part of our business fabric.

Once again, we would like to thank the organizers, speakers and attendees for this day in which we could all share and learn from others.

More information about the “Ambidextrous Company” in the following link.